Why don't we lacquer bridges?

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
TallDad71
Blackwood
Posts: 202
Joined: Thu Jan 19, 2017 6:20 am
Contact:

Why don't we lacquer bridges?

Post by TallDad71 » Thu Sep 26, 2024 7:55 pm

Why don't we lacquer bridges?

Is there a musical reason why we don't, as a rule, apply finish to our bridges? I've always followed the crowd and simply used lemon oil or similar.

I've just made a laminated bridge out of maple and ziricote for a steel string that would really pop under a lacquer and I'm wondering if players would have a problem with this.

My instinct is 'No', most guitarist can transition between a wooden bridge to a steel bridge on an electric without a problem. But, is it likely that the extra friction on a lacquered bridge would lead to plating difficulties?
Alan
Peregrine Guitars

User avatar
kiwigeo
Admin
Posts: 10687
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Why don't we lacquer bridges?

Post by kiwigeo » Thu Sep 26, 2024 8:59 pm

I french polish my instruments and have always finished the bridges on my instruments..classicals and steel strings.

The area around the string holes takes a bit of a beating during string changes so I could understand that being a possible reason for not finishing a bridge.
Martin

johnparchem
Blackwood
Posts: 552
Joined: Mon Jan 21, 2013 2:59 am
Location: Seattle
Contact:

Re: Why don't we lacquer bridges?

Post by johnparchem » Fri Sep 27, 2024 12:21 am

No real knowledge, but I always thought tradition. Finish Classical but not steel strings. I sort of cheat with steel stings and wipe on refined linseed oil (small bottle bought at art store). It wets the grain but is very thin.

Jim watts
Blackwood
Posts: 105
Joined: Thu Oct 10, 2013 3:37 pm

Re: Why don't we lacquer bridges?

Post by Jim watts » Fri Sep 27, 2024 2:53 am

I’m with John above, I’ll wipe on boiled linseed oil or some tung oil.

User avatar
Robert Gleason
Kauri
Posts: 36
Joined: Thu Oct 21, 2021 3:37 am

Re: Why don't we lacquer bridges?

Post by Robert Gleason » Sat Sep 28, 2024 3:07 am

On acoustic guitrars and ukes I shellac my bridges with a coata of 4# cut and steel wool most of it off, leaving just a little in the pores. Then i give it a coat of Renaissance wax and buff it lightly.

User avatar
Taffy Evans
Blackwood
Posts: 1036
Joined: Wed Apr 30, 2008 6:54 pm
Location: Charters Towers North Queensland

Re: Why don't we lacquer bridges?

Post by Taffy Evans » Sat Sep 28, 2024 8:42 am

Hi, I'm in the do not lacquer my bridges camp. I like the look of natural-looking timber, especially as it is often a nice piece of hardwood.
I use a Mirotone Teak wax called Alna 738. It has a different name now, I bought a liter tin of it over 30 years ago and am still using it. It brings out the grain features of the timber and has a nice soft satin look. When I do repairs I use it on dry fingerboards and bridges, so it gets a lot of use.
Taff
Taff

User avatar
TallDad71
Blackwood
Posts: 202
Joined: Thu Jan 19, 2017 6:20 am
Contact:

Re: Why don't we lacquer bridges?

Post by TallDad71 » Sun Oct 20, 2024 4:30 am

Thanks for all the replies.

The consensus seems to be that we don’t do this for aesthetic reason and not one of practicality.
Alan
Peregrine Guitars

Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests