Resawing, Bandsaw drift etc

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
Blackstar1099
Beefwood
Posts: 24
Joined: Tue Sep 08, 2015 11:00 pm

Resawing, Bandsaw drift etc

Post by Blackstar1099 » Thu Jan 20, 2022 8:11 pm

Hi all. Just wanted to talk about re-sawing

I'm assuming a few of you do your own re-sawing. I'm curious if you've seen the Alex Snodgrass video where he says bandsaws should never drift if they're setup correctly by putting the widest part of the gullet of the blade in the centre of the wheel as opposed the traditional method of centre of the blade on the centre of the wheel.

If you haven't seen it: https://www.youtube.com/watch?v=wGbZqWac0jU&t=134s

I recently bought a Lugana sheerforce 16mm blade for my Carbatec BAS-350B 14" as I wanted to finally do some re-sawing of back and side sets. I know a 14" is not an ideal size for re-sawing but it's what I bought at the time. I really don't have the budget or room for something better at this time. I cut up some Sapele and Zebrawood with good results. Then I tried some Spruce that I picked up from Matthews Timber recently and the blade started drifting. I didn't touch the setup. I would have thought softer wood would be easier to cut.

I just used the stock fence that came with the carbatec BAS-350 which isn't very tall. I looked around for a re-saw fence that would work with that saw but can't find anything. If any-one has who has that saw and has a decent fence I'd like to hear.

I've also just started looking at the Magswitch resaw guides which allow for any drifting by pivoting on rollers. Any-one tried those?

Piero

User avatar
kiwigeo
Admin
Posts: 10690
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Resawing, Bandsaw drift etc

Post by kiwigeo » Thu Jan 20, 2022 8:20 pm

Blackstar1099 wrote:
Thu Jan 20, 2022 8:11 pm


I'm assuming a few of you do your own re-sawing. I'm curious if you've seen the Alex Snodgrass video where he says bandsaws should never drift if they're setup correctly by putting the widest part of the gullet of the blade in the centre of the wheel as opposed the traditional method of centre of the blade on the centre of the wheel.

Interesting stuff. My first thoughts without thinking to hard about all this.....even if the blade is placed centrally on the tyre and comes of the tyre with a bit of play the blade passes through the guides before it gets to the wood. Wouldnt properly set up guides correct for the play imparted by running the blade centered on the tyre?

Will definitely look at the set up on my bandie and play with same after watching the video a few more times.
Martin

simso
Blackwood
Posts: 1769
Joined: Mon Apr 25, 2011 10:36 pm
Location: Perth WA

Re: Resawing, Bandsaw drift etc

Post by simso » Thu Jan 20, 2022 8:31 pm

All saw blades drift, how much so comes down to initial setup compensation and then it comes down to feeds and speeds as you cut different woods
Steve
Master of nothing,

Do your own repairs - http://www.mirwa.com.au/How_to_Series.html

User avatar
kiwigeo
Admin
Posts: 10690
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Resawing, Bandsaw drift etc

Post by kiwigeo » Fri Jan 21, 2022 10:08 am

Sharpness of your blade can be a factor too. Like a lot of ppl Im a skinflint and I tend to push my blades past their use by date.
Martin

User avatar
peter.coombe
Blackwood
Posts: 732
Joined: Fri Oct 15, 2010 2:52 pm
Location: Bega, NSW
Contact:

Re: Resawing, Bandsaw drift etc

Post by peter.coombe » Fri Jan 21, 2022 10:27 am

Even with a properly set up saw, runout can cause drift, especially with hardwoods. If you orient the plank so the runout points away from the fence that can help reduce the drift. Other way around and the drift ends up cutting too thin and you have firewood. Is of course better to have no runout, but that is not always possible.
Peter Coombe - mandolin, mandola and guitar maker
http://www.petercoombe.com

User avatar
lamanoditrento
Blackwood
Posts: 605
Joined: Thu May 05, 2016 9:50 am

Re: Resawing, Bandsaw drift etc

Post by lamanoditrento » Fri Jan 21, 2022 11:00 am

you might find this video interesting

https://www.finewoodworking.com/2018/07 ... dsaw-drift
Trent

User avatar
kiwigeo
Admin
Posts: 10690
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Resawing, Bandsaw drift etc

Post by kiwigeo » Fri Jan 21, 2022 11:53 am

So we now have two schools of bandsaw users...1) blade centred on the tyre or 2) blade gullet centred on the tyre :shock:
Martin

Alain Lambert
Wandoo
Posts: 16
Joined: Wed Jan 18, 2017 7:24 am

Re: Resawing, Bandsaw drift etc

Post by Alain Lambert » Sat Jan 22, 2022 9:38 am

This is what I use for a re-saw fence. A short rounded square. You can adjust the piece if the cut want to drift.
Attachments
fence.jpg

hepikohetaniwha
Kauri
Posts: 30
Joined: Sun Oct 14, 2012 7:52 am

Re: Resawing, Bandsaw drift etc

Post by hepikohetaniwha » Sat Jan 22, 2022 3:45 pm

One reason why you get drift is that the gullets are filling up before they reach the bottom of the cut. The feed speed needs to be right for the tooth size and the depth of cut.

Different woods have different ‘sawdust expansion factors’- that is, different woods fill the gullets at different rates. Softwoods tend to fill the gullets faster than hardwoods. This may help explain why you got drift with spruce after having none with hardwoods.

Dave M
Blackwood
Posts: 617
Joined: Tue Jul 15, 2014 6:44 am
Location: Somerset UK

Re: Resawing, Bandsaw drift etc

Post by Dave M » Sun Jan 23, 2022 3:39 am

Sharpness of blade is absolutely crucial apart from anything else. Like start with a new one.

Tension has to be right and the blade guides have be set up just right.

Even then a smallish saw with a limited width of blade is always a bit problematic.
------------------
Dave

Andos
Blackwood
Posts: 117
Joined: Tue Apr 25, 2017 4:12 pm
Location: Taranaki

Re: Resawing, Bandsaw drift etc

Post by Andos » Tue Jan 25, 2022 7:18 pm

Thank you for those setup links.
I have a 14" x 180mm depth of cut modified to 220mm with home made roller guides. It's taken me weeks to learn how to sort the drift out and a 30 min video to find out I've made every setup mistake in the book.
Some lessons are hard learnt!!

Post Reply

Who is online

Users browsing this forum: Google and 57 guests