PJ Qld. Walnut - Australia Red Cedar

A place where you can let us see your finished instruments in all their glory.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Allen
Blackwood
Posts: 5251
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

PJ Qld. Walnut - Australia Red Cedar

Post by Allen » Sat Apr 05, 2008 5:14 pm

I call this guitar a Petite Jumbo, as it's smaller than an SJ. It's just 15" across the lower bout. In fact the dimensions are pretty much that of a OM, but just more of that Fat Bottom Girl look.

I just got this one completed and set up, and I'm really pleased with it. It's really responsive like the last PJ that I built. Much more so that the OOO/OM's that I've built previously. I am building lighter each time, so it could be this, or perhaps it's the body shape. I'll have to go back and build a OOO again to see if there I get an improvement in them as well.

I've got an identically built guitar with an Engelman Spruce top that is ready to buff and assemble. This will be a good comparison of the effect of different tops on tone.

The Specs.

Back and Sides - Queensland Walnut
Top - Australian Red Cedar
Neck - Laminated Queensland Walnut - Cypress
Head Stock Veneers - West Australian Sheoak
Fret Board - West Australian Sheoak
Bridge - West Australian Sheoak
Bindings - Curly Tasmanian Oak
Scale Length - 25.4"
Tuners - Gotoh 510's
Top - 199 grams
Total Weight - 1870 grams

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by Allen on Sat Apr 05, 2008 6:34 pm, edited 1 time in total.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
BillyT
Blackwood
Posts: 355
Joined: Thu Sep 27, 2007 7:57 pm
Location: Location Location

Post by BillyT » Sat Apr 05, 2008 5:56 pm

Very Nice Allen!!

Beautiful wood combo!

User avatar
Bob Connor
Admin
Posts: 3126
Joined: Mon Jul 09, 2007 9:43 pm
Location: Geelong, Australia
Contact:

Post by Bob Connor » Sat Apr 05, 2008 6:15 pm

Beautiful work as always Allen.

The transition in the Sheoak on the back of the headstock into the neck is a really nice touch

I'll be very keen to see what you think of the difference in sound is comparing the Red Cedar and the Engelmann.

I can see a few barbed wires being consumed to celebrate this one.

Bob

User avatar
Allen
Blackwood
Posts: 5251
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Post by Allen » Sat Apr 05, 2008 6:30 pm

Finished one, and got another in my hand right now Bob.

I went into a music store today that I hadn't been into before. Looking for a case that would fit these PJ's without breaking the bank. Several people had a look at the last PJ with the sound port and loved it. Mixed feelings about the sound port though. They all wanted to know if I had other instruments for sale so it's possible that this guitar is going to be sold before I get the other one finished.

It would be nice to have both side by side to compare, but who am I to knock back a sale.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

gratay
Blackwood
Posts: 186
Joined: Sat Oct 27, 2007 8:33 pm

Post by gratay » Sat Apr 05, 2008 7:21 pm

very nice Allen..
that fingerboard gives it that "been played for years " look about it.

User avatar
Craig
Admin
Posts: 1090
Joined: Wed Sep 26, 2007 10:08 am
Location: N.S.W. in the bush

Post by Craig » Sat Apr 05, 2008 7:50 pm

Allen,,,,,,,,,,,,,,,,,,,,, that guitar is SUPERB ! :cl :cl


The cedar top , rosette, binding, body shape, neck volute, fretboard and matching bridge and headplate , bridge pins , hell , the whole package !

Stunning !

Incredible work Allen.


Cheers ,Craig

User avatar
ozziebluesman
Blackwood
Posts: 1538
Joined: Wed Oct 10, 2007 9:12 am
Location: Townsville
Contact:

Post by ozziebluesman » Sat Apr 05, 2008 7:57 pm

Allen, this guitar is just sensational!!!! Thank you for the pictures. Dose the Australian Cedar provide a warm tone?

Cheers

Alan

User avatar
Craig
Admin
Posts: 1090
Joined: Wed Sep 26, 2007 10:08 am
Location: N.S.W. in the bush

Post by Craig » Sat Apr 05, 2008 7:58 pm

Oh ! ,, And the finish !,,,,, :cl :cl

User avatar
Dave White
Blackwood
Posts: 452
Joined: Mon Nov 12, 2007 3:10 am
Location: Hughenden Valley, England
Contact:

Post by Dave White » Sat Apr 05, 2008 8:20 pm

Allen,

Nice guitar with a lot of thought that went into the wood combinations and aesthetics and it works well. I think they are getting better because you are learning as a builder all the time - I'm not totally convinced by the "anorexic" guitars sound better argument. Only way to find out is for you to make a heavy one that sounds fabulous - try some African Blackwood for b/s or the Aussie equivalent, a heavy guitar but you'll drown in amazing sustain and overtones forever (trust me I built one and she's a "heavy" girl :D )

That cedar is the only species I've seen that can claim the adjective "red" proudly - she could be an Irish girl with that head of hair.

How about sounclips of the two guitars when you finish the Engelmann one(three or four bits played by each guitar and well mixed up) and we'll see how many "wood buffs" can correctly identify them. I suspect the sound will be more to do with the maker than the top, and may even be tempted into a "bare my bum on the steps of Hugheneden Valley Post Office at a time and date of your chosing" moment if anyone (apart from you) gets them all correct.

Well done again.
Dave White
[url=http://www.defaoiteguitars.com]De Faoite Stringed Instruments[/url]

jeffhigh
Blackwood
Posts: 1536
Joined: Thu Feb 07, 2008 5:50 am
Location: Caves Beach, NSW
Contact:

Post by jeffhigh » Sat Apr 05, 2008 9:25 pm

And we will expect photographic proof dave...

User avatar
ZOOTMAN
ANZLF Approved Supplier
Posts: 93
Joined: Thu Sep 27, 2007 4:57 pm
Location: Sunny Buffalo NY
Contact:

Post by ZOOTMAN » Sat Apr 05, 2008 10:46 pm

Beutiful guitar Allan. Love the wood combos.

Hesh1956
Blackwood
Posts: 1418
Joined: Thu Sep 27, 2007 9:58 am

Post by Hesh1956 » Sat Apr 05, 2008 11:24 pm

Outstanding guitar Allen!!!! :cl :cl :cl :cl :cl

User avatar
Dennis Leahy
Blackwood
Posts: 872
Joined: Wed Oct 10, 2007 12:32 am
Location: Duluth, MN, US
Contact:

Post by Dennis Leahy » Sat Apr 05, 2008 11:28 pm

Allen, all I can do is to keep pouring it on: just gorgeous! Great wood combinations, and the workmanship and finish look outstanding.

If I saw that in a music store, I would just HAVE to play it!

Dennis
Another damn Yank!

jeffhigh
Blackwood
Posts: 1536
Joined: Thu Feb 07, 2008 5:50 am
Location: Caves Beach, NSW
Contact:

Post by jeffhigh » Sun Apr 06, 2008 6:40 am

Beautiful guitar allen, lovely wood and so well executed.
Jeff

User avatar
Kim
Admin
Posts: 4372
Joined: Wed Sep 26, 2007 8:32 pm
Location: South of Perth WA

Post by Kim » Sun Apr 06, 2008 10:11 am

Excellent work as always Allen, great wood combo, especially like the Aussie Cedar and the WA Sheoak and of course your finish is as good as ANY in the world.

Cheers

Kim

User avatar
Tom Morici
Blackwood
Posts: 103
Joined: Thu Nov 01, 2007 5:46 pm
Location: Montana, USA
Contact:

Post by Tom Morici » Sun Apr 06, 2008 10:44 am

Allen,

That is one right smart looking guitar. Great looking woods, nice combo
It all looks good, you sure have some great wood to work with in your part of the world. I just love that body shape!

I can't wait to see your next one.

Tom

Paul B

Post by Paul B » Sun Apr 06, 2008 11:09 am

Every time I see one of your Aus red cedar topped guitars I'm blown away.

Excellent workmanship. Beautiful result.

Gotta get me some of those tops...

User avatar
Allen
Blackwood
Posts: 5251
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Post by Allen » Sun Apr 06, 2008 4:53 pm

Thanks for all your very kind comments everyone.

They might have a nice finish Kim, but it's a nightmare to take a picture of them. There are so many reflections and glare that all the detail gets lost.

A fellow that I met yesterday who is in Cairns for a holiday, and asked me to do a little touch up on his upright electric bass came by today to pick up his instrument and try out some of mine. He plays jazz and from what I heard of his playing, can handle his own with 4 strings or 6.

He tried a OM IRW-Cypress, OOO Cypress, the Mahogany-Sequoia PJ and this Walnut-Aust. Red Cedar PJ. He gave all the guitars a good work out.

His favorite was this guitar followed by the Mahogany-Sequoia PJ. This guitar has a clean and flatter tone compared to the other ones. It could be the strings as the others all have D'Addorio while this guitar has SIT's.

It was really gratifying to me that he said all of them had a similar "signature" sound, but there were subtleties of tone to each instrument. Much different from off the shelf guitars.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
Dave Anderson
Blackwood
Posts: 260
Joined: Sun Sep 30, 2007 2:38 pm
Location: Florida, USA

Post by Dave Anderson » Tue Apr 08, 2008 1:28 am

I agree with everyone that this is a great looking guitar Allen
and the wood choices are superb.
I love the look of the sheoak with the red cedar top!!
Yep, I would love to play this one! Also- GREAT shape !!
Dave Anderson
Port Richey,Florida

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests