Tool pride

[DarwinStrings]

I have seen a fair bit of tool pride on this forum from various members so I thought I might try to encourage a bit more. I love all my tool but planes are just plain cool. I have spent a bit of time lately cleaning up my Stanley fleet (I only have Stanley planes now as I sold off others I had, mainly duplicates). All I have to do now is get around to "bluing" all the blades and cap irons.

The Plane Fleet

No.151 round, No.101, No.90, No.10-1/2, No.9-1/2, No.6-1/2, No.7, No.5, No.4-1/2, No.2.

sideplane.JPG (85.48 KiB) Viewed 19917 times

frontplane.JPG (88.27 KiB) Viewed 19917 times

Jim

life is good when you are amongst the wood

[Lillian]

Looking nice Jim. Nice collection you have there. You've invested a lot of time with them and I'm sure that they preform flawlessly.

I like what you have done with the handles and knobs. From here they look silky.

[woodrat]

Jim, That is a very nice arsenal you have there....Like Lillian, I like the matching handles too...makes them all look like a team...which I am sure they are.

I will have to post my team when I can...

Thanks for starting this interesting post...

John the Woodrat

[Kim]

Very nice Jim

Lov'in the handles and totes

Cheers

Kim

[rocket]

Very nice Jim, i must say the timber handles are in excellent condition aren't they! you just can't beat nice hand tools can you!
Cheers,,,,
Rod.

[Kim]

It looks to me like Jim has made replacement handles himself, with all that figure I am wondering if maybe they are perhaps Wandoo?? The colour is close and its a great 'hard' wearing wood for the job. What ever the species they are really classy looking bits of kit and if hand made they show a good eye and high degree of skill in removing what was not meant to be there.

Cheers

Kim

[greg]

These are from my boat building days. A bit beat up now, definitely not as prrrrty as Jim's but should be good for my venture into guitar making.

[greg]

Sorry, the list is No 151 flat, Record Rebate, Bullnose rebate, Veritas 90 (can't remember proper name) No's 4,5,6 & block.

[needsmorecowbel]

As the carpenter at work says: "TOOL PORN"

[DarwinStrings]

The handles are all brand new(Maple, maybe I have Lie Nielsen envy), the oil was wiped on 24hrs before I took the pics. The lever caps on all the bench planes are all re-chromed and I fitted a four inch dual exhaust pipes to the number seven.

Jim

[charangohabsburg]

These are some gorgeous planes Jim!
Obviously you've done heaps of great restoration work.
How does this new block plane perform compared to the old one?

[P Bill]

You're an inspiration as usual Jim! I made the mistake of using my good tools for additions and renos to the house. It will take a lot of time to get my kit back to even acceptable. The smooth rebate is choice. I've always considered that the missing tool in my box.

[DarwinStrings]

I guess you can't compare the old 9-1/2 to the new 6-1/2 Markus as the later is a much lower angle. It is a excellent well shaped plane though with a very heavy casting, thick blade and good adjustment. Comparing it to a friends Lie Nielsen it does just as good a job as comfortably (it was only $70 from Amazon I reckon a bargain compared to the competitors).

Same here Bill these planes have been from joinery shop to on site works, they have been with me a long time and at the moment they are not sure who they are in there new paint and other finery. You are right that short carriage makers job has come in very handy over the years.

Jim

[charangohabsburg]

Good to know this, Jim. Thank you. I have the Veritas low angle block plane which is a wonderful tool as well. But I also have a second low angle (a tuned cheapo) which I only use to take off thick shavings instead of adjusting the much more precise Veritas. But I am thinking to replace the cheapo (Anant) with the new Stanley because sometimes blade adjustment with the Anant is a real PIA and the cheap blade doesn't hold the edge for a long time.

Cheers,

[kiwigeo]

My plane fleet

[rocket]

I haven't got a lovely fleet of hand planes as nice as some but might i say i picked up a nice fretting hammer the other day at a garage sale at a bargain basement price. i already have a nice fretting hammer and has served me well in the past but this new one i've scored is great really great for dislodging the occasional tight nut. Check it out!!!
Rod

IMG_1273 (Custom).JPG (62.27 KiB) Viewed 19647 times

[Kim]

Wow Rod what a score!!!

Perfec multitoowl mate, cut dem slots wid da one side, den hamma dah suckazz ohm wid de udda.

[rocket]

Heeee Heeee Heeee

[kiwigeo]

If that's the fret hammer I'd hate to see the frets.....must be at least the same dimension as 80lb/ft rail.

[charangohabsburg]

Yes, that's a great multi use tool. Believe it or not, but with this fretting tool you even can fix messed up crack repairs / varnish touch-ups on $200 chellos.

[rocket]

Markus, i believe that now with my new fretting hammer coupled with my Makita belt sander i have the complete instrument repair tool kit, don't know why i was bothering with those tiny files and teeny weeny planes, too many tools make lutherie far too complicated

[DarwinStrings]

Trying to get the fret to fret Rod?

Jim

[Kim]

Trying to get the fret to fret Rod?

Jim

[Nick]

Markus, i believe that now with my new fretting hammer coupled with my Makita belt sander i have the complete instrument repair tool kit, don't know why i was bothering with those tiny files and teeny weeny planes, too many tools make lutherie far too complicated

What???!!!....... No chainsaw??? How ever do you manage Rod?

[Taffy Evans]

Hi All, heres my little collection.

DSCF0005.JPG (66.05 KiB) Viewed 19521 times