possible good source of bracing
- Geoff Branch
- Gidgee
- Posts: 5
- Joined: Mon Apr 20, 2009 4:16 pm
- Location: Bonny Hills NSW Australia 2445
possible good source of bracing
Just got back from the throwout piles at the back of some our whitegoods suppliers looking for big peices of cardboard ,then it hit me i reakoned that if the packaging around the dishwashers and stuff that comes from germany just might be spruce , well guess what it looks like spruce smells like spruce , tastes like spruce , to tell you the truth me not know but it taps well straight tight grained , could be???? just thought i'd share this moment with you's , branchy
branchy
Bonny Hills NSW
Bonny Hills NSW
- Geoff Branch
- Gidgee
- Posts: 5
- Joined: Mon Apr 20, 2009 4:16 pm
- Location: Bonny Hills NSW Australia 2445
Re: possible good source of bracing
little bit dry with a hint of truffles, goes very nicely with a crisp verdelo
branchy
Bonny Hills NSW
Bonny Hills NSW
- Bob Connor
- Admin
- Posts: 3126
- Joined: Mon Jul 09, 2007 9:43 pm
- Location: Geelong, Australia
- Contact:
Re: possible good source of bracing
Cut some of it up,measure it's stiffness and density and compare it with some Sitka or other spruce that you have on hand Geoff.
Never know - you might be on to something.
Never know - you might be on to something.
- Geoff Branch
- Gidgee
- Posts: 5
- Joined: Mon Apr 20, 2009 4:16 pm
- Location: Bonny Hills NSW Australia 2445
Re: possible good source of bracing
okly dokly i'm onto it , at the least something good might come from the throwout pile, if not it will make gr8 kindleling, or jigsaw puzzle tele bodies?
branchy
Bonny Hills NSW
Bonny Hills NSW
- Mark McLean
- Blackwood
- Posts: 1129
- Joined: Thu Apr 10, 2008 2:03 pm
- Location: Sydney
Re: possible good source of bracing
My wife ordered one of those fancy German dishwashers. She reckoned that my spending on power tools justified her getting this one instead of something made in China. I must admit that it washes the dishes perfectly well. However, when it arrived I also immediately noticed the same thing as Geoff - "bugger me, this packing case is made of German spruce". It looked and smelled like spruce, was snowy white and light, and about 25% of it happened to be perfectly quarter-sawn. It is now bracing in my Nick Lucas style L-00. That guitar is about a year old and going well. It is a great idea to check the rubbish pile of your local electrical retailer. Look for the Meile cartons.
- woodrat
- Blackwood
- Posts: 1154
- Joined: Tue Nov 25, 2008 6:31 am
- Location: Hastings River, NSW.
- Contact:
Re: possible good source of bracing
For those in Sydney who may be close to Emu Plains Felder NSW in Emu Plains gets lots of machines in crates on pallets that are made of Spruce. Some of the sections are 5 x 4 inches in the pallet bases.. There is a wide variation in grain but I saw some fine stuff when I was there last year. Worth a look and they can only say no.
"It's never too late to be what you might have been " - George Eliot
Who is online
Users browsing this forum: No registered users and 64 guests