possible good source of bracing

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Geoff Branch
Gidgee
Posts: 5
Joined: Mon Apr 20, 2009 4:16 pm
Location: Bonny Hills NSW Australia 2445

possible good source of bracing

Post by Geoff Branch » Wed Nov 10, 2010 10:10 pm

Just got back from the throwout piles at the back of some our whitegoods suppliers looking for big peices of cardboard ,then it hit me i reakoned that if the packaging around the dishwashers and stuff that comes from germany just might be spruce , well guess what it looks like spruce smells like spruce , tastes like spruce , to tell you the truth me not know but it taps well straight tight grained , could be???? just thought i'd share this moment with you's , branchy
branchy
Bonny Hills NSW

User avatar
kiwigeo
Admin
Posts: 10690
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: possible good source of bracing

Post by kiwigeo » Wed Nov 10, 2010 10:25 pm

What does spruce taste like?
Martin

User avatar
Geoff Branch
Gidgee
Posts: 5
Joined: Mon Apr 20, 2009 4:16 pm
Location: Bonny Hills NSW Australia 2445

Re: possible good source of bracing

Post by Geoff Branch » Wed Nov 10, 2010 10:36 pm

little bit dry with a hint of truffles, goes very nicely with a crisp verdelo
branchy
Bonny Hills NSW

User avatar
Bob Connor
Admin
Posts: 3126
Joined: Mon Jul 09, 2007 9:43 pm
Location: Geelong, Australia
Contact:

Re: possible good source of bracing

Post by Bob Connor » Wed Nov 10, 2010 10:38 pm

Cut some of it up,measure it's stiffness and density and compare it with some Sitka or other spruce that you have on hand Geoff.

Never know - you might be on to something.
Bob, Geelong
_______________________________________

Mainwaring and Connor Guitars

User avatar
Geoff Branch
Gidgee
Posts: 5
Joined: Mon Apr 20, 2009 4:16 pm
Location: Bonny Hills NSW Australia 2445

Re: possible good source of bracing

Post by Geoff Branch » Wed Nov 10, 2010 10:43 pm

okly dokly i'm onto it , at the least something good might come from the throwout pile, if not it will make gr8 kindleling, or jigsaw puzzle tele bodies?
branchy
Bonny Hills NSW

User avatar
Mark McLean
Blackwood
Posts: 1129
Joined: Thu Apr 10, 2008 2:03 pm
Location: Sydney

Re: possible good source of bracing

Post by Mark McLean » Fri Nov 12, 2010 4:40 pm

My wife ordered one of those fancy German dishwashers. She reckoned that my spending on power tools justified her getting this one instead of something made in China. I must admit that it washes the dishes perfectly well. However, when it arrived I also immediately noticed the same thing as Geoff - "bugger me, this packing case is made of German spruce". It looked and smelled like spruce, was snowy white and light, and about 25% of it happened to be perfectly quarter-sawn. It is now bracing in my Nick Lucas style L-00. That guitar is about a year old and going well. It is a great idea to check the rubbish pile of your local electrical retailer. Look for the Meile cartons.

User avatar
woodrat
Blackwood
Posts: 1154
Joined: Tue Nov 25, 2008 6:31 am
Location: Hastings River, NSW.
Contact:

Re: possible good source of bracing

Post by woodrat » Thu Nov 18, 2010 11:47 am

For those in Sydney who may be close to Emu Plains Felder NSW in Emu Plains gets lots of machines in crates on pallets that are made of Spruce. Some of the sections are 5 x 4 inches in the pallet bases.. There is a wide variation in grain but I saw some fine stuff when I was there last year. Worth a look and they can only say no.
"It's never too late to be what you might have been " - George Eliot

Post Reply

Who is online

Users browsing this forum: Google and 63 guests