TruOil finish...

[Pete Howlett]

You are viewing a re-constructed thread by the ANZLF recovery team. For more information click here.

"Originally Posted on: Mon Aug 23, 2010 9:21 pm"

When people complete my kits or do an extreme build I point them towards a TruOil finish. forn an enthusiastic amateur it is one of the easiest to do and if refreshed every six months is a great way for budding builders to 'fiddle' with their work and get to know it better...
heres a short video I did of the 'refresh'process:


youtu.be/


LINK

[matthew]

but can we get tru-oil in Oz?

[John Maddison]

matthew wrote:
but can we get tru-oil in Oz?

Magnum Sports in NSW is one supplier, found it via Google. Tru-Oil is used to seal wooden gun stocks so relatively easy to source.

[Pete Howlett]

My boys in Finland got it from the 'gun shop'...

I've tried most of them and it is the best.

[liam_fnq]

my local gun sports shop stocks it.

[Pete Howlett]

It amuses me - 'my local gun sports shop'... we don't have them here in Blighty, notlocal ones anyway! - they don't trust us.

[Kim]

We have them because we're barbaric, in fact I hear we just hung our entire parliament, which is always a good thing..car salesmen and lawyers next.

I like truoil, most gun shops sell it. I apply it from the start as Pete shows in his vid. Sand the wood with micromesh and burnish each 'thin' coat and it will build over a few days into quite a high gloss and your arms will be big and strong so you can handle an even bigger gun and eat really chunky soup without a problem...its all relative you know.

Cheers

Kim

[liam_fnq]

I use my shotgun to shoot all my finishes. Less time burnishing and more time drinking, grunting and cooking meat.

[Insomnomaniac]

liam_fnq wrote:
I use my shotgun to shoot all my finishes. Less time burnishing and more time drinking, grunting and cooking meat.

You need to get yourself a double barrelled one - saves you having to reload before the second coat...

[John Maddison]

Kim wrote:
I hear we just hung our entire parliament ... car salesmen and lawyers next.

You left out Accountants!! ... but then if we hanged all the accountants & lawyers we'd have no-one left who'd be megalomaniac enough to run for parliament & form a government.

[vandenboom]

I have used Tru Oil just once on a guitar. Very easy to work with and lovely finish. The main issue I had was the guitar picked up some very, very light scratches in its early life. When I lightly sanded them out and just reapplied a few coats to that area, I got what I think are referred to as 'witness lines'. In pursuing this, I was told by a "finisher" that this is part of its limitation and that the only way to get it right again was to scrape the whole surface back and reapply from scratch, if you'll excuse the pun.

Should I have gone about this in a different way?
Frank

[Kim]

May be Frank..As mentioned above I think that many very 'thin' coats is the best bet and during application burnish them. In other words firmly rub just a dab of oil on one surface only. Grab a clean bit of Tshirt and start rubbing to take off all the excess. The oil will begin to dry getting sticky and causing heat via friction. The heat will cause the oil to dry more rapidly but keep rubbing firmly in a circular motion until the friction is all but gone. Leave it go a few hours and do it all again when ever you feel the need to punish yourself for not buying a compressor.

Big arms for big arms

1737-big-gun.jpg (194.97 KiB) Viewed 13405 times

Cheers

Kim

[Stephen Kinnaird]

Kim wrote:

Big arms for big arms

1737-big-gun.jpg (194.97 KiB) Viewed 13402 times

Cheers

Kim

Holy cow, look at that thing!
Why is he even trying to aim it? What's the point? Anything/everything is going down (including him) when he pulls the trigger.

Cool pic--thanks!

Steve

[DarwinStrings]

It probably sends up a mushroom cloud Steve and how is his mates form, letting him talk him into holding the thing up for him while he shoots it.

Jim

[Stephen Kinnaird]

Or maybe those two guys are just very small?
Throwing perspective all outta whack?

I dunno... still a cool pic.

Steve




This is the final re-constructed message of this topic posted by the ANZLF help team.