My Cairns Uke Festival Build

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

User avatar
Allen
Blackwood
Posts: 5251
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: My Cairns Uke Festival Build

Post by Allen » Thu Nov 04, 2010 2:19 pm

First off, welcome to the forum Chuck, and thanks for the comments. I've had a look at your website many times, and am really impressed with your work. Good to have you on board.

I pore fill with WEST Systems epoxy and finish with a Australian product called Mirotone 3220. It's a pre-catalyzed lacquer that requires thinning if you want to get the best results on instruments. I cut it by 100%. In that mix I always add a splash of extra slow thinner (retarder).

I've heard of the products you are using, but they simply are not available here so have not tried them. Nor do I suppose will you be able to get Mirotone in Hawaii unless you are willing to ship via surface.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
Nick
Blackwood
Posts: 3639
Joined: Thu Feb 26, 2009 11:20 am
Location: Christchurch, New Zealand
Contact:

Re: My Cairns Uke Festival Build

Post by Nick » Thu Nov 04, 2010 2:20 pm

Welcome to the forum Chuck. Might I back up Allen's comments about your work, really nice stuff & you certainly have used some beautiful bits of Koa in your time.
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.

User avatar
Hippety Hop
Blackwood
Posts: 175
Joined: Wed Apr 30, 2008 11:18 am
Location: Moorabbin

Re: My Cairns Uke Festival Build

Post by Hippety Hop » Thu Nov 04, 2010 2:20 pm

Stunning little line-up there Allen. Really original, unique and beautiful.

Cheers Hip.
[img]http://planetsmilies.net/not-tagged-smiley-10140.gif[/img][img]http://planetsmilies.net/person-smiley-1062.gif[/img]
Hippus Erectus

moorebettahukes
Gidgee
Posts: 2
Joined: Thu Nov 04, 2010 2:14 pm

Re: My Cairns Uke Festival Build

Post by moorebettahukes » Thu Nov 04, 2010 2:21 pm

Thank you for the welcomes and thanks for a great forum. Since posting I have gone into your archives here and have learned a good deal about your finishing processes. And you are correct Allen, and excellent finish is totally dependent on your prep work. I look forward to further enlightenment on this forum. Mahalo!

User avatar
Matt_Blacka
Beefwood
Posts: 21
Joined: Sat May 09, 2009 6:08 pm
Location: Sydney
Contact:

Re: My Cairns Uke Festival Build

Post by Matt_Blacka » Thu Nov 04, 2010 2:22 pm

Hi Allen,

These ukes are looking great, and you're really churning them out now.

It would be great to hear a comparison of the sound from each.

Keep up the good work! I'm sure you will get heaps of attention at the festival with some of these on display.

Matt
MAKAIO Ukuleles
www.makaioukuleles.blogspot.com

User avatar
Allen
Blackwood
Posts: 5251
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: My Cairns Uke Festival Build

Post by Allen » Thu Nov 04, 2010 2:22 pm

Not all that hard to pump this many out, when it's all I've been really focused on since late January. If life didn't keep getting in the way I could have done a few more.

I've got a set of Saverez on one, Aquilla's on most and a set of Wuth clear high tension on another, just to compare strings on very similar instruments.

The Saverez are the brightest as I expected. and the Wurth are just a bit sweeter than the Aquilla's, but If I closed my eyes and you mixed the instruments up, I'd have a hell of a time picking the concerts apart. The Tenor would be easy to pick out, as it's just so much fuller and quite mellow when played lightly, but in your face when you hook in to it.

I'm pleased about that as it's a I'm pretty confident that I can replicate the tone. I'd like to try some lower tension strings next time around to compare.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
Daintree
Gidgee
Posts: 6
Joined: Sat Jan 24, 2009 1:38 pm
Location: Far North Queensland, Australia
Contact:

Re: My Cairns Uke Festival Build

Post by Daintree » Thu Nov 04, 2010 2:23 pm

Beautiful work Allan....Well done!

Doug.

User avatar
Dennis Leahy
Blackwood
Posts: 872
Joined: Wed Oct 10, 2007 12:32 am
Location: Duluth, MN, US
Contact:

Re: My Cairns Uke Festival Build

Post by Dennis Leahy » Thu Nov 04, 2010 2:23 pm

Allen, I love that shot of you surrounded by the ukuleles! Gives a great sense of scale. Makes you look like Gulliver in Lilliput.

Have I mentioned that I really like the signature sound holes.

Dennis
Another damn Yank!

User avatar
Allen
Blackwood
Posts: 5251
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: My Cairns Uke Festival Build

Post by Allen » Thu Nov 04, 2010 2:24 pm

I've finally got some sound samples courtesy of Alan Hamley, who brought up his recording equipment when he came up for the Cairns Ukulele Festival.

He recorded a few of my instruments for me. This one, a tenor ukulele, and my Brazilian Mahogany Weissenborn style guitar.

Here is the sound bite to this one.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
DarwinStrings
Blackwood
Posts: 1877
Joined: Thu Nov 13, 2008 10:27 pm
Location: Darwin

Re: My Cairns Uke Festival Build

Post by DarwinStrings » Thu Nov 04, 2010 2:26 pm

Thanks for posting the sound Allen, it sounds great and although I enjoy my soprano I am really looking forward to getting a tenor finished for two reasons, I like the longer scale cause it is more comfy for my hand and that extra tension in the strings really appeals to me.

Jim
Life is good when you are amongst the wood.
Jim Schofield

User avatar
Localele
Moderator
Posts: 367
Joined: Tue Aug 12, 2008 6:54 am
Location: Corndale,NSW
Contact:

Re: My Cairns Uke Festival Build

Post by Localele » Thu Nov 04, 2010 2:26 pm

While the soprano and concert do have different sounds , the tenor has a very different voice again.Much fuller and more musical. Going up to a baritone has the same sized step up again.

This is the final re-constructed message of this topic posted by the ANZLF help team.
Cheers from Micheal.

Remember the "5P Rule".
Preparation Prevents Piss Poor Performance.

Post Reply

Who is online

Users browsing this forum: kiwigeo and 79 guests