Making Back Braces with a radius jig.

Got a new way of doing something? Or maybe an old method that needs some clarification.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
StratoA
Wandoo
Posts: 15
Joined: Thu May 19, 2016 4:50 pm
Location: Lake Macquarie NSW
Contact:
Contact StratoA

Making Back Braces with a radius jig.

Post by StratoA » Mon Jun 13, 2016 10:50 pm

Attached is a short video clip of me using a radius jig to make back braces, This video clip was made as a demo for my students. Its a quick and easy way to get an even radius every time.
https://www.youtube.com/watch?v=vMZZiDEDLt4
Top
User avatar
Mark McLean
Blackwood
Posts: 1124
Joined: Thu Apr 10, 2008 2:03 pm
Location: Sydney

Re: Making Back Braces with a radius jig.

Post by Mark McLean » Thu Jun 16, 2016 6:07 am

Nice tip Strato.
I plane the bottoms into a radius shape using a shooting board, and then finish it with sandpaper in the radius dish (which is a bit fiddly). I think your method would be faster, and very worthwhile if you are doing a lot of braces for multiple builds.
Thanks
Mark
Top
collinsguitar
Gidgee
Posts: 9
Joined: Sun Aug 23, 2015 6:24 am

Re: Making Back Braces with a radius jig.

Post by collinsguitar » Mon Jul 25, 2016 5:49 am

Great idea.
Top
Post Reply

Return to “Tutorials”

Who is online

Users browsing this forum: No registered users and 3 guests