This year I made a "L1" style guitar and here are some of the jigs used. They all are fairly standard but with some additions. I will add some pics of the guitar to the gallery soon.
See "file comment" for a brief description. Hopefully the pics are self explanation as typing is not my strong suit.
Luke.
Various jigs
Various jigs
- Attachments
-
- My dad made a cnc machine at the start of the year, the first project was the template. I used a vee cutter to make out the bracing pattern. It was also used to route the main assembly mould and bender sides.
-
- On dad's cnc machine I made a new back and top radius dish. The rough cut is done and half the finishing cut.
-
- Back radius mould finished.
-
- Side spreader lined in foam. It applies pressure to most of the guitar outline.
-
- Main body assembly mould. I added t-nuts the the face layer of the mould. I then use threaded rod the and a t-nut disc to clamp up the plates with the addition of a glue-up rim
-
- Main body assembly mould with top and back plate glue-up rim. The rim has a strip of foam which aligns with the linings. I put radial saw cuts through the ply to allow the rim to bend to the back contour.
-
- Side bender with interchange moulds. For the moulds I just glue the sheet metal to the ply side, line the inside with thin aluminium sheet. I then put screws through the face into the ply sides so it holds together when heated.
-
- I use a bar heater to heat up my side bender. It was only $15 so cheaper than a light box setup and more appropriate for heating things.
-
- I use this to clamp binding at the waist. Simple but very useful, is was good when cutting them to length and extra pressure when gluing.
-
- This is to do the radius on the finger board. I make a new router base for the radius I need. This is a 300mm radius for ukuleles. It slide along the plywood guides.
-
- I use this as a fret press. Shaped a block of brass to match the required radius, it is also handy for bottling beer.
Re: Various jigs
Thanks for these photos! I really like the side press and clamping system.
Bob Francis
Bob Francis
-
charangohabsburg
- Blackwood
- Posts: 1818
- Joined: Sat Oct 16, 2010 1:25 am
- Location: Switzerland
Re: Various jigs
These are some bloody brilliant tweaks to "well known" tools! 
I have wondered many times why people would use light bulbs as a heat source, rather than IR bulbs or some other device designed to heat up things.
Congrats Luke! (regarding both, your jigs and your dad).
I have wondered many times why people would use light bulbs as a heat source, rather than IR bulbs or some other device designed to heat up things.
Could you please lend me your dad for, let's say the time he needs to build me a CNC machine?LUKE_LEE wrote:File comment: My dad made a cnc machine at the start of the year, the first project was the template. I used a vee cutter to make out the bracing pattern. It was also used to route the main assembly mould and bender sides.
Congrats Luke! (regarding both, your jigs and your dad).
Markus
To be stupid is like to be dead. Oneself will not be aware of it.
It's only the others who suffer.
To be stupid is like to be dead. Oneself will not be aware of it.
It's only the others who suffer.
Re: Various jigs
Some good work there, I had never thought about using a strip heater as a heat source, makes perfect sense really.
Cheer
Col
Cheer
Col
-
Trevor Gore
- Blackwood
- Posts: 1629
- Joined: Mon Jun 20, 2011 8:11 pm
Re: Various jigs
Some smart thinking there, Luke, and a very nice guitar, too.
Fine classical and steel string guitars
Trevor Gore, Luthier. Australian hand made acoustic guitars, classical guitars; custom guitar design and build; guitar design instruction.
Trevor Gore, Luthier. Australian hand made acoustic guitars, classical guitars; custom guitar design and build; guitar design instruction.
-
woodrat
- Blackwood
- Posts: 1154
- Joined: Tue Nov 25, 2008 6:31 am
- Location: Hastings River, NSW.
- Contact:
Re: Various jigs
Hi Luke....Nice jigging there..... 
"It's never too late to be what you might have been " - George Eliot
Who is online
Users browsing this forum: No registered users and 1 guest