Advice on neck repair
-
- Beefwood
- Posts: 26
- Joined: Sat Feb 26, 2011 5:24 pm
Advice on neck repair
Hi all,
wondering if I can get some advice. I have been asked to repair a banjo neck that was damaged on a flight. It looks pretty clean (haven't seen it up close). Are there any specific tips from the greater font of wisdom?
thanks
wondering if I can get some advice. I have been asked to repair a banjo neck that was damaged on a flight. It looks pretty clean (haven't seen it up close). Are there any specific tips from the greater font of wisdom?
thanks
- Attachments
-
- banjo break.jpg (62.21 KiB) Viewed 12387 times
Re: Advice on neck repair
Never tried a repair on this type of thing, but it looks like a pretty clean separation of the finger joint from that picture. - More like the glue failed with minor breakage of the timber at the extremes of the "fingers"
...............
Kevin
Kevin
- rocket
- Blackwood
- Posts: 1210
- Joined: Thu Apr 30, 2009 8:43 pm
- Location: melbourne,, outer east
- Contact:
Re: Advice on neck repair
A finger jointed neck? Now I've seen it all
Rod.
Rod.
Like I said before the crash, " Hit the bloody thing, it won't hit ya back
www.octiganguitars.com
www.octiganguitars.com
Re: Advice on neck repair
Yep, pretty sure its some sort of finger joint - check out this pic
...............
Kevin
Kevin
Re: Advice on neck repair
Pretty common on the low end Taylors
Re: Advice on neck repair
If it ends out that the joint is un repairable, the way many broken headstocks are repaired is to cut a scarf joint and simply make a new headstock. Not as simple as a glue up, but a backup plan to keep in mind
Re: Advice on neck repair
Yeh deerings and all that use it all the time,
the thought is to maximise the contact area during glue up, usually there pretty good, they only fail at the joint if insufficient glue was used,
Just glue it up and it should be perfectly fine, (make sure old glue is removed)
the thought is to maximise the contact area during glue up, usually there pretty good, they only fail at the joint if insufficient glue was used,
Just glue it up and it should be perfectly fine, (make sure old glue is removed)
Re: Advice on neck repair
use a glue remover like deglue or make one up with KY jelly and white vinegar . Then you can try reglueing it. I may opt here for epoxy or med ca and let clamped for 24 hr.
Member of the board ASIA
Authorized CF Martin Repair Center
http://www.bluescreekguitars.com
Authorized CF Martin Repair Center
http://www.bluescreekguitars.com
Re: Advice on neck repair
That would really make your eyes water if you got that mixed up with your personal lubricantuse a glue remover like deglue or make one up with KY jelly and white vinegar
Bruce Mc.
Re: Advice on neck repair
Today was a good day, I learnt something new again. I have never tried that recipe, but you bet I will on monday.tippie53 wrote:use a glue remover like deglue or make one up with KY jelly and white vinegar
Thanks for the tip John
Steve
Re: Advice on neck repair
LOL.......I'm picturing a few members trying to explain to their wives why the KY jelly stocks are running low
Martin
-
- Beefwood
- Posts: 26
- Joined: Sat Feb 26, 2011 5:24 pm
Re: Advice on neck repair
I am much obliged to you all for the advice.
Who is online
Users browsing this forum: No registered users and 44 guests