Zebra wood?
Zebra wood?
I just bought a chunk of Zebrano off eBay for $70. 1m long, 235mm wide and 26mm thick. Great quarter. Just wondering what I'll do with it in the end. Is it suitable for acoustics? or is it best reserved for some electrics down the road?
I did a search here and found references to one guitar built, by Hippety Hop, but only one partial photo...
Couple pix. I couldn't resist it, as it looks almost perfect.... As always, thanks for any opinions.....
I did a search here and found references to one guitar built, by Hippety Hop, but only one partial photo...
Couple pix. I couldn't resist it, as it looks almost perfect.... As always, thanks for any opinions.....
I wish I was half the man my dog thinks I am....
Cheers,
Nick
https://www.facebook.com/pages/DMI-hand ... 744?ref=hl
Cheers,
Nick
https://www.facebook.com/pages/DMI-hand ... 744?ref=hl
Re: Zebra wood?
Great buy Nick
I am currently building an 8 string baritone with zebra wood. It cost me $100 for a set from a local guy. He purchased quite a few sets from the deceased estate of a Perth luthier (DeJago) years ago.
LMI and RC Tonewoods sell it, and liken it as an alternative to Indian Rosewood, however tap tone is not as good as IR.
It sands well, glues well and my pipe bent cutaway bent with ease. Glue is difficult to remove and the close grain appears as though grain filling may not be necessary for certain types of finishes.
I was going to use it on my recent Selmer mac but decided against it as it was an unknown.
Cheers Maurice
I am currently building an 8 string baritone with zebra wood. It cost me $100 for a set from a local guy. He purchased quite a few sets from the deceased estate of a Perth luthier (DeJago) years ago.
LMI and RC Tonewoods sell it, and liken it as an alternative to Indian Rosewood, however tap tone is not as good as IR.
It sands well, glues well and my pipe bent cutaway bent with ease. Glue is difficult to remove and the close grain appears as though grain filling may not be necessary for certain types of finishes.
I was going to use it on my recent Selmer mac but decided against it as it was an unknown.
Cheers Maurice
Re: Zebra wood?
I can see why you couldn't resist, nice wood you have there!
I cannot help as I've never used it but Maurie seems to have offered some educated advice above.
I cannot help as I've never used it but Maurie seems to have offered some educated advice above.
- Nick
- Blackwood
- Posts: 3639
- Joined: Thu Feb 26, 2009 11:20 am
- Location: Christchurch, New Zealand
- Contact:
Re: Zebra wood?
demonx wrote:I can see why you couldn't resist, nice wood you have there!
Nice buy Nick, seems a host of possibilities are open to you, I'd be going the acoustic route if you have enough for a B&S set.
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.
Nice to hear in church but not in a Mexican prison.
Re: Zebra wood?
Cheers, guys. It just looked too cool to not at least try out.
I think I should be able to get five slices out of it, which ought to give me 2 Back and Side sets(OM or smaller) as well as a piece that would give at least a back and sides for a uke(maybe a top too). So I think the $80-odd investment, plus a bit to chop it up looks pretty reasonable now....
I think I should be able to get five slices out of it, which ought to give me 2 Back and Side sets(OM or smaller) as well as a piece that would give at least a back and sides for a uke(maybe a top too). So I think the $80-odd investment, plus a bit to chop it up looks pretty reasonable now....
Last edited by nnickusa on Tue Sep 03, 2013 2:17 pm, edited 1 time in total.
I wish I was half the man my dog thinks I am....
Cheers,
Nick
https://www.facebook.com/pages/DMI-hand ... 744?ref=hl
Cheers,
Nick
https://www.facebook.com/pages/DMI-hand ... 744?ref=hl
Re: Zebra wood?
Hmmm, what would I make? I have a Tele and an Ibanez Musician already.......probably an acoustic?
I wish I was half the man my dog thinks I am....
Cheers,
Nick
https://www.facebook.com/pages/DMI-hand ... 744?ref=hl
Cheers,
Nick
https://www.facebook.com/pages/DMI-hand ... 744?ref=hl
Re: Zebra wood?
Not a bad score for seventy bills.
Steve
Steve
- DarwinStrings
- Blackwood
- Posts: 1877
- Joined: Thu Nov 13, 2008 10:27 pm
- Location: Darwin
Re: Zebra wood?
You know you are in deep when you start buying wood off Ebay cause it looks pretty
Jim
Jim
Life is good when you are amongst the wood.
Jim Schofield
Jim Schofield
Re: Zebra wood?
Jim, don't remind me....I keep telling myself it's because it's so close to on quarter.....
I know there was WAS Anonymous going on in the Hunter, but is there a chapter up my way?
Stuff it, I don't need to make excuses......I'm a grown man, aren't I.......ps, don't tell my wife.....
I know there was WAS Anonymous going on in the Hunter, but is there a chapter up my way?
Stuff it, I don't need to make excuses......I'm a grown man, aren't I.......ps, don't tell my wife.....
I wish I was half the man my dog thinks I am....
Cheers,
Nick
https://www.facebook.com/pages/DMI-hand ... 744?ref=hl
Cheers,
Nick
https://www.facebook.com/pages/DMI-hand ... 744?ref=hl
Re: Zebra wood?
I have a zebrano tenor uke with a spruce top and it sounds as good as it looks. Definitely suitable for an acoustic. Have fun with the build.
Miguel
Miguel
Who is online
Users browsing this forum: Google and 21 guests