Unusual Blackwood

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Bob Connor
Admin
Posts: 3126
Joined: Mon Jul 09, 2007 9:43 pm
Location: Geelong, Australia
Contact:

Unusual Blackwood

Post by Bob Connor » Mon May 30, 2016 7:52 am

A friend of mine in Tasmania sent me this pic of a Blackwood tree growing on his property.

There would be some fairly crazy grain the bend (break) one would imagine.

Whether it would be stable enough to use once dried would be another matter.
Dom's Blackwoodjpg.jpg
Bob, Geelong
_______________________________________

Mainwaring and Connor Guitars

Mat
Myrtle
Posts: 50
Joined: Fri Feb 28, 2014 9:09 am

Re: Unusual Blackwood

Post by Mat » Mon May 30, 2016 9:05 am

I'd say most of that lower section would have nice figure throughout it. When I mill twisty 'ugly' sections I always end up with the best looking timber.

routout
Blackwood
Posts: 289
Joined: Mon Jun 15, 2015 7:34 am

Re: Unusual Blackwood

Post by routout » Mon May 30, 2016 9:05 am

One piece neck and heal. :D
John ,of way too many things to do.

User avatar
demonx
Blackwood
Posts: 1395
Joined: Sat Jul 14, 2012 6:55 pm
Location: Ballarat Victoria
Contact:

Re: Unusual Blackwood

Post by demonx » Mon May 30, 2016 2:35 pm

Reminds me of this tree I saw on my block the other day:
image.jpeg

blackalex1952
Blackwood
Posts: 776
Joined: Tue Aug 27, 2013 6:36 pm
Location: North East Victoria

Re: Unusual Blackwood

Post by blackalex1952 » Mon May 30, 2016 7:01 pm

River oak roots form "knees" which used to be used, before the trees were protected,for boatbuilding. In fact, for hundreds of years the English kings and queens owned the oak forests for their navies.The guys culturing the trees used to split saplings, prune, bend and brace them etc in order to grow the oak trees into shapes that became on maturity, the stems, sterns, knees of the great warships. The techniques handed from father to son meant that the son was harvesting ships components that were planted pruned and shaped by their fathers and grandfathers, and the trees they planted were to be harvested when these men were either very old or long gone. It would make sense, if only for cosmetic reasons, to make a guitar neck from one piece that included the heel and an integral part of the tree. The blackwood in the photo has been a shoot that has re grown from a cut branch. So it would not be as strong as a bend that was made in a sapling and kept in that position to mature, with continuous grain running through it. But the decorative aspect of the tree in the photo would be interesting, lots of curly grain. The Australian Aborigines used to bend and plat saplings which became trees, to mark sacred areas and as a warning to the un initiated to stay away. Three crossed plats, I was told, signifies a Secret Women's site, two signifies a Secret Male site. So, if cutting bush timbers, it would be a mark of respect to our first people not to cut any sacred markers.
Ross
"Everything I say on the topic is based solely upon inexperience and assumption!"

Post Reply

Who is online

Users browsing this forum: No registered users and 47 guests